Ultra Disk DVR 7 Manual de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 101
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
34
PTZ camera itself supports OSD menu, use the setup value to more easily enter and use the OSD menu even in DVR.
If OSD enter command is 95 + PSET for example, designate 95 for Menu item,
if shortcut key to use Tour function is 71 ~79 + PSET, designate 70 for Tour item and
if shortcut key to use Pattern function is 81 ~ 89 + PSET, designate 80 for Pattern item.
The setting information herein is used for PAN/TILT control in 5.1.5 (to be described).
If you click Default, basic setup values are given (i.e., Menu: 95, Tour: 70, Pattern: 80).
For further details on setting, please refer to the PTZ camera manual.
y Click ( ) , direction buttons on the right-hand side of the ID column to set ID number (i.e., 0 ~ 9999) of each PTZ.
y While pressing (+) or (-) button, ID increases or decreases by 10 units.
y Choose ‘OK’ to confirm the setting.
4.4.3 Audio
y Please click ( ) DEVICES>Audio and the following screen will appear.
y The Audio menu will allow you to choose whether to record Audio.
y When you check 5 a check box on No column, corresponding audio and video are recorded. However, if you do not check
the check box, recording stops.
y Choose ‘OK’ to confirm the setting.
4.4.4 Alarm In
y Please click ( ) DEVICES>Alarm In and the following screen will appear.
y The Alarm In menu will allow you to give title and to select the type of Alarm input.
y Click ( ) the keyboard icon on the right-hand side of each frame on Title column and the virtual keyboard will appear. Then,
please register the title of Alarm input.
y When you check 5 a check box on No column, a corresponding Alarm starts operating. However, if you do not check the
check box, the operation stops.
y Click ( ) each frame on Type column to select type of a corresponding Alarm input.
NO: contact is normally open (Normally open)
NC: contact is normally closed (Normally closed)
y Choose ‘OK’ to confirm setting.
4.4.5 Alarm Out
y Please click ( ) DEVICES>Alarm Out and the following screen will appear.
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 100 101

Comentarios a estos manuales

Sin comentarios