Ultra Disk DVR 7 Manual de usuario descargar pdf (Pagina 17)

ALIEN616 User’s Manual V2.0.5

2. Getting Started

2.1 Starting and Shutting Down Your DVR

Proper startup and shutdown procedures are crucial to expanding the life of your DVR.

To startup your DVR:

1. Ensure the power supply is plugged into an electrical outlet. It is HIGHLY

recommended that an Uninterruptible Power Supply (UPS) be used in conjunction

with the unit.

2. Turn on the switch on rear panel

3. After startup, the Status indicator LED will remain green. A splash screen with the

status of the DSP and HDD will be shown. The first row of icons at the bottom of the

screen shows the DSP status. If an ‘X’ is shown on top of an icon, it means that the

DSP initialisation has failed. The second row of icons at the bottom of the screen will

show the HDD status. If an ‘X’ is shown, it means that the HDD is not installed or

cannot be detected.

There are two proper ways to shut down DVR:

• OPTION 1: Shutdown in Menu

1. Enter the Shutdown menu, shown in Figure 1 by clicking on Menu > Shutdown.

Figure 1. Shutdown Menu

2. Select the Shutdown button.

3. Turn off switch on rear panel.

• OPTION 2: Manual Shutdown

1. Press and hold the POWER button for 3 seconds.

2. Enter the administrator’s username and password in the dialog box for

authentication.

3. Click the Yes button.

4. Message “Are you sure to turn off DVR?” will display.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 95 96

Sin comentarios

Ultra Disk DVR 7 Manual de usuario Pagina 17