Ultra Disk DVR 7 Manual de usuario descargar pdf (Pagina 52)

ALIEN616 User’s Manual V2.0.5

7.5 Detecting Video Tampering

Video tampering (i.e. moving camera to a different position) can also be detected and set

to trigger an action on your DVR. To setup video tempering detection:

1. Enter Camera Management/Settings menu by clicking Menu > Setting >

Camera.

2. Select camera under Channel number to configure video loss detection and

click the Set button.

3. Select the Advanced tab.

4. Check the Tamper Detection checkbox, as shown in Figure 13.

Figure 13. Camera Settings Menu

5. Click the Area Settings button to enter the area setup.

6. Setup tampering area, as shown in Figure 14. Only one tampering area can

be set, with the full screen being the maximum area.

Figure 14. Tampering Area Setup

7. Set detection sensitivity. The higher the value set, the higher the sensitivity.

8. Click OK to return to the Camera Settings/Management menu.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 95 96

Sin comentarios

Ultra Disk DVR 7 Manual de usuario Pagina 52